On this page, you can add a new trading pair by clicking on “Add Pair,” provided that you have connected an exchange.
You can also modify your trading strategy for a pair. There are several tabs available, including Buy settings, Sell settings, Balance settings, Indicators & ATR Trailing, DCA, and Stop loss.
Settings for Trading strategies:
Use the tabs (Buy settings, Sell settings, Balance settings, Indicators & ATR Trailing, DCA, Stop loss) to configure your strategy for a trading pair.
You don’t have to remember all these things. Here is a list of what trading settings are currently available. If you are a beginner, we would advise you to change only the default settings and not make your own strategy entirely.
If you don’t know anything about the nuxBot trading logic, we would recommend reading that first.
As a beginner we would recommend you to focus on these settings:
- Buy settings: xEMA, Buy Level
- Sell settings: % Profit Target
- Balance settings: Buy amount, DCA Buy amount, Max DCAs allowed
(We mean that you should take care of balance management so that a stop loss never has to happen. We would say at least 8-10 DCAs, even if that sounds a lot.)
Tip: At the beginning you can use Simulated Trading to test whether your strategy works well. - Indicators & ATR Trailing settings: ATR Trailing buy/sell multiplier, reverse
- DCA settings: DCA when…, Minimum -x% of last buy to allow DCA when…
- Our devs like “DCA when BB” more.
- Stop loss settings: SL when Trade is -x%
(Only if you sometimes want to accept losses and/or have too few DCAs.)
Important: Do not put “-” or “+” in front of any of the numbers, the bot will do it itself. Example: In the case of a stop loss, only the number should be entered, e.g. “20”. The bot then perceives this as “-20%”.
Buy settings:
- Buy enabled: Enable or disable the buy order.
- xEMA (Number): The number of candles used to calculate EMA.
- Buy Level (Number/Decimal): Percentage below the lowest EMA to allow buy orders.
Sell settings:
- Sell enabled: Enable or disable the sell order.
- % Profit Target (Number/Decimal): The profit percentage to target before selling.
- Disable Buy after Sell/SL: If enabled, “Buy enabled” will be disabled for the pair after a Sell/SL.
Balance settings:
- Balance settings:
- Buy amount (Number/Decimal): The amount of the quote currency to buy.
- DCA Buy amount (Number/Decimal): The amount of the quote currency to buy on DCA.
- Martingale DCA Multiplier (Number/Decimal): The multiplier of the Martingale DCA. Setting to 1 leads to each Martingale DCA order buying the same number of quote as you already have.
- Max. DCAs allowed (Number): The maximum number of DCAs allowed.
- Simulated Trading:
- Simulated Trading enabled: Enable or disable simulated trading.
Indicators & ATR Trailing settings:
These are confirming indicators. They are used to get a better price for buying/selling.
Timeframe to calculate Indicators (e.g. 30m): The timeframe used when calculating indicators.
RSI:
- Buy RSI enabled: Enable or disable RSI for buying.
- Sell RSI enabled: Enable or disable RSI for selling.
- RSI buy level (Number/Decimal): The RSI level to enable buy at.
- RSI sell level (Number/Decimal): The RSI level to enable sell at.
- RSI buy length (Number): The length (candles used) for the RSI buy calculation.
- RSI sell length (Number): The length (candles used) for the RSI sell calculation.
ADX:
- Buy ADX enabled: Enable or disable ADX for buying.
- Sell ADX enabled: Enable or disable ADX for selling.
- ADX buy level (Number/Decimal): The ADX level to enable buy at.
- ADX sell level (Number/Decimal): The ADX level to enable sell at.
- ADX buy length (Number): The length (candles used) for the ADX buy calculation.
- ADX sell length (Number): The length (candles used) for the ADX sell calculation.
Stoch:
- Buy Stoch enabled: Enable or disable Stochastic for buying.
- Sell Stoch enabled: Enable or disable Stochastic for selling.
- Stoch buy level (Number/Decimal): The Stochastic level to enable buy at.
- Stoch sell level (Number/Decimal): The Stochastic level to enable sell at.
- Stoch buy length (Number): The length (candles used) for the Stochastic buy calculation.
- Stoch sell length (Number): The length (candles used) for the Stochastic sell calculation.
ATR Trailing:
- ATR-Trailing buy enabled: Enable ATR Trailing for buy signals.
- ATR-Trailing sell enabled: Enable ATR Trailing for sell signals.
- ATR-Trailing buy multiplier: Set the ATR-Trailing multiplier for buy signals.
Set it low (1.3-1.5) to trade small trends, set it higher (2-3) to trade longer trends. - ATR-Trailing sell multiplier: Set the ATR-Trailing multiplier for sell signals.
Set it low (1.3-1.5) to trade small trends, set it higher (2-3) to trade longer trends. - ATR-Trailing buy length: Set the ATR-Trailing buy length (candles used) for calculating ATR-T buy.
- ATR-Trailing sell length: Set the ATR-Trailing sell length (candles used) for calculating ATR-T sell.
- ATR-Trailing buy MA length: Set the ATR-Trailing buy Moving Average length (candles used) for calculating ATR-T buy moving average.
- ATR-Trailing sell MA length: Set the ATR-Trailing sell Moving Average length (candles used) for calculating ATR-T sell moving average.
- ATR-Trailing buy reverse enabled: Changes whether ATR-T should be up or down to allow buys.
If deactivated: ATR-T Buy needs to show UP/be under price to allow buys.
If activated: ATR-T Buy needs to show DOWN/be over price to allow buys.
(Recommended to activate if “Buy settings” -> “Buy level” is used.) - ATR-Trailing sell reverse enabled: Changes whether ATR-T should be up or down to allow sells.
If deactivated: ATR-T Sell needs to show DOWN/be over price to allow sells.
If activated: ATR-T Sell needs to show UP/be under price to allow sells.
DCA settings:
- DCA enabled: Enable Dollar Cost Averaging (DCA).
- Use Martingale DCA: When enabled, Martingale DCA will be used and not regular DCA.
- DCA when -x% enabled: Enable DCA when the complete trade is down by a certain percentage.
- -x%: Set the minus percentage to trigger DCA.
- Minimum -x% of last buy to allow DCA when -x%: Set the minimum minus percentage difference between the last buy price and the current price to trigger DCA.
- DCA when HighBB enabled: Enable DCA when the High Bollinger Band drops below the last buy price.
- BB Length: Set the Bollinger Bands length (candles used) for calculating Bollinger Bands.
- Minimum -x% of last buy to allow DCA when HighBB: Set the minimum minus percentage difference between the last buy price and the current price to trigger trigger DCA.
Stop loss settings:
- Stop loss enabled: Enable Stop loss to sell if the trade goes against you.
- SL when Trade is -x% (Number/Decimal): Minus percentage at which the bot will open a stop loss to stop the trade at a loss.
Don’t forget to click on “Save Settings” after you set everything.
If you need help, please contact our support team.
